Hydropower, hydraulic power or water power is power that is derived from the force or energy of moving water, which may be harnessed for useful purposes.
Saint Anthony Falls, United States
Prior to the widespread availability of commercial electric power, hydropower was used for irrigation, and operation of various machines, such as watermills, textile machines, sawmills, dock cranes, and domestic lifts.
Another method used a trompe, which produces compressed air from falling water, which could then be used to power other machinery at a distance from the water.
History
Waterwheels and mills
Hydropower has been used for hundreds of years. In India, water wheels and watermills were built; in Imperial Rome, water powered mills produced flour from grain, and were also used for sawing timber and stone. The power of a wave of water released from a tank was used for extraction of metal ores in a method known as hushing. Hushing was widely used in Britain in the Medieval and later periods to extract lead and tin ores. It later evolved into hydraulic mining when used during the California gold rush.
In China and the rest of the Far East, hydraulically operated “pot wheel” pumps raised water into irrigation canals. In the 1830s, at the peak of the canal-building era, hydropower was used to transport barge traffic up and down steep hills using inclined plane railroads. Direct mechanical power transmission required that industries using hydropower had to locate near the waterfall. For example, during the last half of the 19th century, many grist mills were built at Saint Anthony Falls, utilizing the 50-foot (15 m) drop in the Mississippi River. The mills contributed to the growth of Minneapolis.
Hydraulic power pipes
Hydraulic power networks also existed, using pipes carrying pressurized liquid to transmit mechanical power from a power source, such as a pump, to end users. These were extensive in Victorian cities in the United Kingdom. A hydraulic power network was also in use in Geneva, Switzerland. The world famous Jet d’Eau was originally only the over pressure valve of this network.
Natural manifestations
In hydrology, hydropower is manifested in the force of the water on the riverbed and banks of a river. It is particularly powerful when the river is in flood. The force of the water results in the removal of sediment and other materials from the riverbed and banks of the river, causing erosion and other alterations.
Modern usage
There are several forms of water power currently in use or development. Some are purely mechanical but many primarily generate electricity. Broad categories include:
- Waterwheels, used for hundreds of years to power mills and machinery
- Hydroelectricity, usually referring to hydroelectric dams, or run-of-the-river setups (eg hydroelectric-powered watermills)
- Damless hydro, which captures the kinetic energy in rivers, streams and oceans
- Vortex power, which creates vortices which can then be tapped for energy
- Tidal power, which captures energy from the tides in horizontal direction
- Tidal stream power, which does the same vertically
- Wave power, which uses the energy in waves
- Osmotic power, which channels river water into a container separated from sea water by a semipermeable membrane.
- Marine current power which captures the kinetic energy from marine currents.
- Ocean thermal energy conversion which exploits the temperature difference between deep and shallow waters.
Hydroelectric power now supplies about 715,000 megawatts or 19% of world electricity. Large dams are still being designed. The world’s largest is the Three Gorges Dam on the third longest river in the world, the Yangtze River. Apart from a few countries with an abundance of hydro power, this energy source is normally applied to peak load demand, because it is readily stopped and started. It also provides a high-capacity, low-cost means of energy storage, known as “pumped storage”.
Hydropower produces essentially no carbon dioxide or other harmful emissions, in contrast to burning fossil fuels, and is not a significant contributor to global warming through CO2.
Hydroelectric power can be far less expensive than electricity generated from fossil fuels or nuclear energy. Areas with abundant hydroelectric power attract industry. Environmental concerns about the effects of reservoirs may prohibit development of economic hydropower sources.
The chief advantage of hydroelectric dams is their ability to handle seasonal (as well as daily) high peak loads. When the electricity demands drop, the dam simply stores more water (which provides more flow when it releases). Some electricity generators use water dams to store excess energy (often during the night), by using the electricity to pump water up into a basin. Electricity can be generated when demand increases. In practice the utilization of stored water in river dams is sometimes complicated by demands for irrigation which may occur out of phase with peak electrical demands.
Not all hydroelectric power requires a dam; a run-of-river project only uses part of the stream flow and is a characteristic of small hydropower projects. A developing technology example is the Gorlov helical turbine.
Tidal power
Harnessing the tides in a bay or estuary has been achieved in France (since 1966), Canada and Russia, and could be achieved in other areas with a large tidal range. The trapped water turns turbines as it is released through the tidal barrage in either direction. A possible fault is that the system would generate electricity most efficiently in bursts every six hours (once every tide). This limits the applications of tidal energy; tidal power is highly predictable but not able to follow changing electrical demand.
Tidal stream power
A relatively new technology, tidal stream generators draw energy from currents in much the same way that wind generators do. The higher density of water means that a single generator can provide significant power. This technology is at the early stages of development and will require more research before it becomes a significant contributor. Several prototypes have shown promise.
Wave power
Harnessing power from ocean surface wave motion might yield much more energy than tides. The feasibility of this has been investigated, particularly in Scotland in the UK. Generators either coupled to floating devices or turned by air displaced by waves in a hollow concrete structure would produce electricity. For countries with large coastlines and rough sea conditions, the energy of waves offers the possibility of generating electricity in utility volumes.
Small scale hydro power
Small scale hydro or micro-hydro power has been increasingly used as renewable energy source, especially in remote areas where other power sources are not viable. Small scale hydro power systems can be installed in small rivers or streams with little or no discernible environmental effect on things such as fish migration. Most small scale hydro power systems make no use of a dam or major water diversion, but rather use water wheels. Many areas of the North Eastern United States have locations along streams where water wheel driven mills once stood. Sites such as these can be renovated and used to generate electricity. Also, small scale hydro power plants can be combined with other energy sources as a supplement. For example a small scale hydro plant could be used along with a system of solar panels attached to a battery bank. While the solar panels may create more power during the day, when the majority of power is used, the hydro plant will create a smaller, constant flow of power, not dependent on the sunlight.
There are some considerations in a micro-hydro system installation. The amount of water flow available on a consistent basis, since lack of rain can affect plant operation. Head, or the amount of drop between the intake and the exit. The more head, the more power that can be generated. There can be legal and regulatory issues, since most countries, cities, and states have regulations about water rights and easements.
Over the last few years, the US Government has increased support for alternative power generation. Many resources such as grants, loans, and tax benefits are available for small scale hydro systems.
In poor areas, many remote communities have no electricity. Micro hydro power, with a capacity of 100 kW or less, allows communities to generate electricity. This form of power is supported by various organizations such as the UK’s Practical Action.
Micro-hydro power can be used directly as “shaft power” for many industrial applications. Alternatively, the preferred option for domestic energy supply is to generate electricity with a generator or a reversed electric motor which, while less efficient, is likely to be available locally and cheaply.
Resources in the United States
There is a common misconception that economically developed nations have harnessed all of their available hydropower resources. In the United States, according to the US Department of Energy, “previous assessments have focused on potential projects having a capacity of 1 MW and above”. This may partly explain the discrepancy. More recently, in 2004, an extensive survey was conducted by the US-DOE which counted sources under 1 MW (mean annual average), and found that only 40% of the total hydropower potential had been developed. A total of 170 GW (mean annual average) remains available for development. Of this, 34% is within the operating envelope of conventional turbines, 50% is within the operating envelope of microhydro technologies (defined as less than 100 kW), and 16% is within the operating envelope of unconventional systems. In 2005, the US generated 1012 kilowatt hours of electricity. The total undeveloped hydropower resource is equivalent to about one-third of total US electricity generation in 2005. Developed hydropower accounted for 6.4% of total US electricity generated in 2005.
Calculating the amount of available power
A hydropower resource can be measured according to the amount of available power, or energy per unit time. In large reservoirs, the available power is generally only a function of the hydraulic head and rate of fluid flow. In a reservoir, the head is the height of water in the reservoir relative to its height after discharge. Each unit of water can do an amount of work equal to its weight times the head.
The amount of energy, E, released when an object of mass m drops a height h in a gravitational field of strength g is given by
The energy available to hydroelectric dams is the energy that can be liberated by lowering water in a controlled way. In these situations, the power is related to the mass flow rate.
Substituting P for E?t and expressing m?t in terms of the volume of liquid moved per unit time (the rate of fluid flow, ?) and the density of water, we arrive at the usual form of this expression:
or
A simple formula for approximating electric power production at a hydroelectric plant is:
P = hrgk
where P is Power in kilowatts, h is height in meters, r is flow rate in cubic meters per second, g is acceleration due to gravity of 9.8 m/s2, and k is a coefficient of efficiency ranging from 0 to 1. Efficiency is often higher with larger and more modern turbines.
Some hydropower systems such as water wheels can draw power from the flow of a body of water without necessarily changing its height. In this case, the available power is the kinetic energy of the flowing water.
where v is the speed of the water, or with
where A is the area through which the water passes, also
Over-shot water wheels can efficiently capture both types of energy.
Issues
Hydro-powered electricity, however is not without its drawbacks. Dam failures can be very hazardous, e.g. the Banqiao Dam, which killed 171,000. Also, rivers move silt, and therefore dams fill with silt, and eventually become unable to store enough water to provide water and power in dry weather.
In addition to the significant threat that dams pose to fish populations and the ecosystems of rivers and streams, hydropower can negatively impact both the flow and quality of water. Lower levels of oxygen in the water can present a threat to animal and plant life. However, these issues can be addressed if fish ladders are put in place to ensure safe passage around the area, and the water is aerated on a regular basis to maintain adequate oxygen levels safe for animal and plant life. The flow of water should be monitored closely to prevent the ecological dangers associated with over-stressing bodies of water. These dangers can easily be avoided by shutting down pumping operations temporarily to allow balance to return to damaged ecosystem.
Hydroelectricity
The Three Gorges Dam, the largest hydro-electric power station in the world.
Hydroelectricity is electricity generated by hydropower, i.e., the production of power through use of the gravitational force of falling or flowing water. It is the most widely used form of renewable energy. Once a hydroelectric complex is constructed, the project produces no direct waste, and has a considerably lower output level of the greenhouse gas carbon dioxide (CO2) than fossil fuel powered energy plants. Worldwide, hydroelectricity supplied an estimated 816 GWe in 2005. This was approximately 20% of the world’s electricity, and accounted for about 88% of electricity from renewable sources.
Electricity generation
Hydraulic turbine and electrical generator.
Hydroelectric dam in cross section
Most hydroelectric power comes from the potential energy of dammed water driving a water turbine and generator. In this case the energy extracted from the water depends on the volume and on the difference in height between the source and the water’s outflow. This height difference is called the head. The amount of potential energy in water is proportional to the head. To obtain very high head, water for a hydraulic turbine may be run through a large pipe called a penstock.
Pumped storage hydroelectricity produces electricity to supply high peak demands by moving water between reservoirs at different elevations. At times of low electrical demand, excess generation capacity is used to pump water into the higher reservoir. When there is higher demand, water is released back into the lower reservoir through a turbine. Pumped storage schemes currently provide the only commercially important means of large-scale grid energy storage and improve the daily load factor of the generation system. Hydroelectric plants with no reservoir capacity are called run-of-the-river plants, since it is not then possible to store water. A tidal power plant makes use of the daily rise and fall of water due to tides; such sources are highly predictable, and if conditions permit construction of reservoirs, can also be dispatchable to generate power during high demand periods.
Less common types of hydro schemes use water’s kinetic energy or undammed sources such as undershot waterwheels.
Calculating the amount of available power
A simple formula for approximating electric power production at a hydroelectric plant is: P = ?hrgk, where P is Power in watts, ? is the density of water (~1000 kg/m3), h is height in meters, r is flow rate in cubic meters per second, g is acceleration due to gravity of 9.8 m/s2, and k is a coefficient of efficiency ranging from 0 to 1. Efficiency is often higher with larger and more modern turbines.
Annual electric energy production depends on the available water supply. In some installations the water flow rate can vary by a factor of 10:1 over the course of a year.
Industrial hydroelectric plants
While many hydroelectric projects supply public electricity networks, some are created to serve specific industrial enterprises. Dedicated hydroelectric projects are often built to provide the substantial amounts of electricity needed for aluminium electrolytic plants, for example. In the Scottish Highlands of United Kingdom, there are examples at Kinlochleven and Lochaber, constructed during the early years of the 20th century. The Grand Coulee Dam, long the world’s largest, switched to support Alcoa aluminum in Bellingham, Washington, United States for American World War II airplanes before it was allowed to provide irrigation and power to citizens (in addition to aluminum power) after the war. In Suriname, the Brokopondo Reservoir was constructed to provide electricity for the Alcoa aluminium industry. New Zealand’s Manapouri Power Station was constructed to supply electricity to the aluminium smelter at Tiwai Point. As of 2007 the Kárahnjúkar Hydropower Project in Iceland remains controversial.
Largest hydro-electric plants
The Three Gorges Dam complex on the Yangtze River in Hubei, China, has the world’s largest generating capacity and generates the most electricity in the world. It includes 2 generating stations. They are the Three Gorges Dam (22,500 MW when completed) and Gezhouba Dam (3,115 MW). As of 2009, the total generating capacity of this complex is 21,515 MW. The whole project is planned to be completed in 2011, when the total generating capacity will be 25,615 MW. In 2008, this complex generated 97.9 TWh of electricity.
The Itaipu power plant on the Paraná River on the Brazil-Paraguay border currently produces second most hydroelectricity in the world. With 20 generator units and 14,000 MW of installed capacity, in 2008 the Itaipu power plant reached a new historic record for electricity production by generating 94.68 terawatt-hours (340,800 TJ).
Small-scale hydro-electric plants
Although large hydroelectric installations generate most of the world’s hydroelectricity, some situations require small hydro plants. These are defined as plants producing up to 10 megawatts, or projects up to 30 megawatts in North America. A small hydro plant may be connected to a distribution grid or may provide power only to an isolated community or a single home. Small hydro projects generally do not require the protracted economic, engineering and environmental studies associated with large projects, and often can be completed much more quickly. A small hydro development may be installed along with a project for flood control, irrigation or other purposes, providing extra revenue for project costs. In areas that formerly used waterwheels for milling and other purposes, often the site can be redeveloped for electric power production, possibly eliminating the new environmental impact of any demolition operation. Small hydro can be further divided into mini-hydro, units around 1 MW in size, and micro hydro with units as large as 100 kW down to a couple of kW rating.
Small hydro schemes are particularly popular in China, which has over 50% of world small hydro capacity.
Small hydro units in the range 1 MW to about 30 MW are often available from multiple manufacturers using standardized “water to wire” packages; a single contractor can provide all the major mechanical and electrical equipment (turbine, generator, controls, switchgear), selecting from several standard designs to fit the site conditions. Micro hydro projects use a diverse range of equipment; in the smaller sizes industrial centrifugal pumps can be used as turbines, with comparatively low purchase cost compared to purpose-built turbines.
Economics
The major advantage of hydroelectricity is elimination of the cost of fuel. The cost of operating a hydroelectric plant is nearly immune to increases in the cost of fossil fuels such as oil, natural gas or coal, and no imports are needed.
Hydroelectric plants also tend to have longer economic lives than fuel-fired generation, with some plants now in service which were built 50 to 100 years ago. Operating labor cost is also usually low, as plants are automated and have few personnel on site during normal operation.
Where a dam serves multiple purposes, a hydroelectric plant may be added with relatively low construction cost, providing a useful revenue stream to offset the costs of dam operation. It has been calculated that the sale of electricity from the Three Gorges Dam will cover the construction costs after 5 to 8 years of full generation.
Greenhouse gas emissions
Since hydroelectric dams do not burn fossil fuels, they do not directly produce carbon dioxide (a greenhouse gas). While some carbon dioxide is produced during manufacture and construction of the project, this is a tiny fraction of the operating emissions of equivalent fossil-fuel electricity generation. One measurement of greenhouse gas related and other externality comparison between energy sources can be found in the ExternE project by the Paul Scherrer Institut and the University of Stuttgart which was funded by the European Commission. According to this project, hydroelectricity produces the least amount of greenhouse gases and externality of any energy source. Coming in second place was wind, third was nuclear energy, and fourth was solar photovoltaic. The extremely positive greenhouse gas impact of hydroelectricity is found especially in temperate climates. The above study was for local energy in Europe; presumably similar conditions prevail in North America and Northern Asia, which all see a regular, natural freeze/thaw cycle (with associated seasonal plant decay and regrowth).
Related activities
Reservoirs created by hydroelectric schemes often provide facilities for water sports, and become tourist attractions in themselves. In some countries, aquaculture in reservoirs is common. Multi-use dams installed for irrigation support agriculture with a relatively constant water supply. Large hydro dams can control floods, which would otherwise affect people living downstream of the project.
Disadvantages
Very Hazardous
Dam failures have been some of the largest man-made disasters in history. Also, good design and construction are not an adequate guarantee of safety. Dams are tempting industrial targets for wartime attack, sabotage and terrorism.
For example, the Banqiao Dam failure in Southern China resulted in the deaths of 171,000 people and left millions homeless. Also, the creation of a dam in a geologically inappropriate location may cause disasters like the one of the Vajont Dam in Italy, where almost 2000 people died, in 1963.
Smaller dams and micro hydro facilities create less risk, but can form continuing hazards even after they have been decommissioned. For example, the Kelly Barnes small hydroelectric dam failed in 1967, causing 39 deaths with the Toccoa Flood, ten years after its power plant was decommissioned in 1957.
Limited Service Life
Almost all rivers convey silt. Dams on those rivers will retain silt in their catchments, because by slowing the water, and reducing turbulence, the silt will fall to the bottom. Siltation reduces a dam’s water storage so that water from a wet season cannot be stored for use in a dry season. Often at or slightly after that point, the dam becomes uneconomic. Near the end of the siltation, the basins of dams fill to the top of the lowest spillway, and even storage from a storm to the end of dry weather will fail. Some especially poor dams can fail from siltation in as little as 20 years. Larger dams are not immune. For example, the Three Gorges Dam in China has an estimated life that may be as short as 70 years.
Dams’ useful lives can be extended with sediment bypassing, special weirs, and forestation projects to reduce a watershed’s silt production, but at some point most dams become uneconomic to operate.
Environmental damage
Hydroelectric projects can be disruptive to surrounding aquatic ecosystems both upstream and downstream of the plant site. For instance, studies have shown that dams along the Atlantic and Pacific coasts of North America have reduced salmon populations by preventing access to spawning grounds upstream, even though most dams in salmon habitat have fish ladders installed. Salmon spawn are also harmed on their migration to sea when they must pass through turbines. This has led to some areas transporting smolt downstream by barge during parts of the year. In some cases dams have been demolished (for example the Marmot Dam demolished in 2007) because of impact on fish. Turbine and power-plant designs that are easier on aquatic life are an active area of research. Mitigation measures such as fish ladders may be required at new projects or as a condition of re-licensing of existing projects.
Generation of hydroelectric power changes the downstream river environment. Water exiting a turbine usually contains very little suspended sediment, which can lead to scouring of river beds and loss of riverbanks. Since turbine gates are often opened intermittently, rapid or even daily fluctuations in river flow are observed. For example, in the Grand Canyon, the daily cyclic flow variation caused by Glen Canyon Dam was found to be contributing to erosion of sand bars. Dissolved oxygen content of the water may change from pre-construction conditions. Depending on the location, water exiting from turbines is typically much warmer than the pre-dam water, which can change aquatic faunal populations, including endangered species, and prevent natural freezing processes from occurring. Some hydroelectric projects also use canals to divert a river at a shallower gradient to increase the head of the scheme. In some cases, the entire river may be diverted leaving a dry riverbed. Examples include the Tekapo and Pukaki Rivers in New Zealand.
Greenhouse gas emissions
Lower positive impacts are found in the tropical regions, as it has been noted that the reservoirs of power plants in tropical regions may produce substantial amounts of methane and carbon dioxide. This is due to plant material in flooded areas decaying in an anaerobic environment, and forming methane, a very potent greenhouse gas. According to the World Commission on Dams report, where the reservoir is large compared to the generating capacity (less than 100 watts per square metre of surface area) and no clearing of the forests in the area was undertaken prior to impoundment of the reservoir, greenhouse gas emissions from the reservoir may be higher than those of a conventional oil-fired thermal generation plant. Although these emissions represent carbon already in the biosphere, not fossil deposits that had been sequestered from the carbon cycle, there is a greater amount of methane due to anaerobic decay, causing greater damage than would otherwise have occurred had the forest decayed naturally.
In boreal reservoirs of Canada and Northern Europe, however, greenhouse gas emissions are typically only 2% to 8% of any kind of conventional fossil-fuel thermal generation. A new class of underwater logging operation that targets drowned forests can mitigate the effect of forest decay.
In 2007, International Rivers accused hydropower firms for cheating with fake carbon credits under the Clean Development Mechanism (CDM), for hydropower projects already finished or under construction at the moment they applied to join the CDM. These carbon credits – of hydropower projects under the CDM in developing countries – can be sold to companies and governments in rich countries, in order to comply with the Kyoto protocol.
Population relocation
Another disadvantage of hydroelectric dams is the need to relocate the people living where the reservoirs are planned. In February 2008, it was estimated that 40-80 million people worldwide had been physically displaced as a direct result of dam construction. In many cases, no amount of compensation can replace ancestral and cultural attachments to places that have spiritual value to the displaced population. Additionally, historically and culturally important sites can be flooded and lost. Such problems have arisen at the Three Gorges Dam project in China, the Clyde Dam in New Zealand and the Il?su Dam in Southeastern Turkey.
Affected by flow shortage
Changes in the amount of river flow will correlate with the amount of energy produced by a dam. Because of global warming, the volume of glaciers has decreased, such as the North Cascades glaciers, which have lost a third of their volume since 1950, resulting in stream flows that have decreased by as much as 34%. The result of diminished river flow can be power shortages in areas that depend heavily on hydroelectric power.
Comparison with other methods of power generation
Hydroelectricity eliminates the flue gas emissions from fossil fuel combustion, including pollutants such as sulfur dioxide, nitric oxide, carbon monoxide, dust, and mercury in the coal. Hydroelectricity also avoids the hazards of coal mining and the indirect health effects of coal emissions. Compared to nuclear power, hydroelectricity generates no nuclear waste, has none of the dangers associated with uranium mining, nor nuclear leaks. Unlike uranium, hydroelectricity is also a renewable energy source.
Compared to wind farms, hydroelectricity power plants have a more predictable load factor. If the project has a storage reservoir, it can be dispatched to generate power when needed. Hydroelectric plants can be easily regulated to follow variations in power demand.
Unlike fossil-fueled combustion turbines, construction of a hydroelectric plant requires a long lead-time for site studies, hydrological studies, and environmental impact assessment. Hydrological data up to 50 years or more is usually required to determine the best sites and operating regimes for a large hydroelectric plant. Unlike plants operated by fuel, such as fossil or nuclear energy, the number of sites that can be economically developed for hydroelectric production is limited; in many areas the most cost effective sites have already been exploited. New hydro sites tend to be far from population centers and require extensive transmission lines. Hydroelectric generation depends on rainfall in the watershed, and may be significantly reduced in years of low rainfall or snowmelt. Long-term energy yield may be affected by climate change. Utilities that primarily use hydroelectric power may spend additional capital to build extra capacity to ensure sufficient power is available in low water years.
In parts of Canada (the provinces of British Columbia, Manitoba, Ontario, Quebec, Newfoundland and Labrador) hydroelectricity is used so extensively that the word “hydro” is often used to refer to any electricity delivered by a power utility. The government-run power utilities in these provinces are called BC Hydro, Manitoba Hydro, Hydro One (formerly “Ontario Hydro”), Hydro-Québec and Newfoundland and Labrador Hydro respectively. Hydro-Québec is the world’s largest hydroelectric generating company, with a total installed capacity (2007) of 35,647 MW, including 33,305 MW of hydroelectric generation.
Countries with the most hydro-electric capacity
The ranking of hydro-electric capacity is either by actual annual energy production or by installed capacity power rating. A hydro-electric plant rarely operates at its full power rating over a full year; the ratio between annual average power and installed capacity rating is the capacity factor. The installed capacity is the sum of all generator nameplate power ratings. Sources came from BP Statistical Review – Full Report 2009
The top six dams, in descending order of their annual electricity generation, are: the Three Gorges Dam in China, the Itaipu Dam on the border of Paraguay and Brazil, the Guri Dam in Venezuela, the Tucurui dam in Brazil, the Sayano-Shushenskaya Dam in Russia and the Krasnoyarsk hydroelectric dam, also in Russia (see List of the largest hydroelectric power stations).
Brazil, Canada, Norway, Switzerland and Venezuela are the only countries in the world where the majority of the internal electric energy production is from hydroelectric power, while Paraguay not only produces 100% its electricity from hydroelectric dams, but exports 90% of its production to Brazil and to the Argentine. Norway produces 98-99% of its electricity from hydroelectric.
China
Canada
Brazil
United States
Russia
Norway
India
Venezuela
Japan
SwedenOld hydro-electric power stations
Australia
- A small hydroelectric station, generating 650 kW, opened at Waratah, Tasmania in 1885.
- Duck Reach, Launceston, Tasmania. Completed 1895. The first publicly owned hydro-electric plant in the Southern Hemisphere. Supplied power to the city of Launceston for street lighting.
- The Snowy Mountains Scheme has turbines all along the tunnel so it, in some perspectives it is also another hydroelectric station. However, it only operates during peak hours of the day and mostly during the evening and early night. It supplies electricity to all over the regions of New South Wales.
Canada
- Decew Falls 1, St. Catharines, Ontario completed 25 August 1898. Owned by Ontario Power Generation. Four units are still operational. Recognized as an IEEE Milestone in Electrical Engineering & Computing by the IEEE Executive Committee in 2002.
- The oldest continuously-operated hydroelectric generator in Canada is located in St. Stephen, New Brunswick. Part of the construction of the Milltown Cotton Mill, this rope-driven generator originally powered the electric lights for the mill when it opened in 1882, and in 1888 started providing power to homes in the town. NB Power now owns and operates this as part of the Milltown Dam hydroelectric station.
Chile
- Chivilingo was the first hydroelectric plant in Chile and the second in South America. With first power produced in 1897, it has two Pelton wheel turbines each turning a 215 kW generator. It was installed to provide power to mines and the city of Lota, Chile.
United States
- Appleton, Wisconsin completed 1882, A waterwheel on the Fox river supplied the first commercial hydroelectric power for lighting to two paper mills and a house, two years after Thomas Edison demonstrated incandescent lighting to the public. Within a matter of weeks of this installation, a power plant was also put into commercial service at Minneapolis.
- Niagara Falls, New York. Operation began locally in 1895 and power was transmitted to Buffalo, New York, in 1896.
- Claverack Creek, in Stottville, New York, believed to be the oldest hydro power site in the United States. The turbine, a Morgan Smith, was constructed in 1869 and installed 2 years later. It is one of the earliest water wheel installations in the United States to generate electricity. It is owned today by Edison Hydro.
- The oldest continuously-operated commercial hydroelectric plant in the United States is built on the Hudson River at Mechanicville, New York. The seven 750 kW units at this station initially supplied power at a frequency of 38 Hz, but later were increased in speed to 40 Hz. It went into commercial service 22 July 1898. It is now being restored to its original condition and remains in commercial operation.
Cost
United States
In the United States, a study is required before constructing a hydroelectric project. In 2008, a study could cost up to $50,000 for a 100 feet (30 m) run of a stream. Both federal and state licenses were required. A license typically cost between $150,000 and $1 million. A project earns money from the sale of energy, the sale of capacity, and the sale of renewable energy credits.
